Feed Systems Accessories
for New Style Schuld, Pax, AP and Choretime Feed Systems and Bins

Schuld & PAX parts prices are based on a $291 minimum flex system order
 individual prices are higher, call before ordering.

Timers
Schuld Boots and Tail Pieces
Schuld PVC Tubing, Flighting & Feed Drops for 3" System
Shutoffs
Schuld Gear Drives, Motors, and Final Drop Shutoffs
Old Style Schuld Motors (Only)

 HALO FEED SYSTEM CONTROL 

  • The Halo Feed System Control is the solution to your feed delivery control needs.  Halo uses an infrared sensor and fully featured electronics to manage your livestock feed system.  

  • High power infrared sensing technology eliminates problems caused by changes in moisture, temperature, humidity, and feed density.

  • Halo electronics contain a delay start timer, maximum run timer, cumulative times, and alarm contacts.

  • Halo electronics are enclosed in a Nema 4x watertight and corrosion proof enclosure for protection and can be mounted in an office, hallway, or right next to the feed motor.

  • Halo comes fully prewired right out of the box for easy installation into any new or existing feeding system.  Using a box for easy installation into any new or existing feeding system.  Using a Halo Feed System Control in conjunction with the included alarm outputs will put your mind at ease when feeding your livestock.  The system will automatically signal your alarm dialer to notify you when livestock is out of feed.

  • Try a Halo Feed System Control today and you will never use a proximity switch or hopper level switch again.

AUGHALOJRMAX

 Junior Halo with Delay Start and Max Run 240V $199.00 Order Now

AUGHALO

Halo with Remote Box, Delay, Max Run and Alarm Contact $309.00 Order Now

 

Timers

24 Hour Timers - 40 AMP

24 Hour Timer, 120 V, 40 AMP, 2 HP

VITP101PC

68.95

  Order Now
Extra Set of Dial Pins for 24 Hour Timer

VITP10PCP

3.89

  Order Now
White AP On/Off 120 Minute Timer
AGPFLX-3412
$ 74.40
 Order Now
Percentage Cycle Timers

10 Minute Paragon Percentage Cycle Timer - 120V

VITTIMER110

107.00

  Order Now

10 Minute Paragon Percentage Cycle Timer - 208-240V

VITTIMER220

90.25

  Order Now

 

Schuld Gear Drives, Motors, and Final Drop Shutoffs

Schuld parts prices are based on a $291 minimum flex system order
 individual prices are higher, call before ordering.

Schuld or Pax 358 RPM Motor Plus Gear Box
3/4 HP Motor Plus Gear Box, 358 RPM SCU401-1013 $ 491.14  Order Now
1 HP Motor Plus Gear Box, 358 RPM SCU401-1016 $ 588.56  Order Now
1-1/2 HP Motor Plus Gear Box, 358 RPM SCU401-1019 $ 723.86  Order Now
Schuld Gear Drive Motor Only
3/4 HP Gear Drive Motor Only SCU451-1071 $274.66  Order Now
1 HP Gear Drive Motor Only SCU451-1072 $ 372.08  Order Now
1-1/2 HP Gear Drive Motor Only SCU451-1073 $ 507.38  Order Now
Port and Driver Kit
(for Gear Drive)		 SCU401-3006 $ 40.59  Order Now
Marathon Universal Replacement Motors

3/4 HP Gear drive Motor Only

PAX735391C

$ 178.50

  Order Now

1 HP Gear drive Motor Only

PAX735392C

$ 202.50

 Order Now

1-1/2 HP Gear Drive Motor Only

PAX735393C

$ 233.00

 Order Now
Old Style Schuld Motors (Only) 

3/4 HP Motor Only

SCU300503

$267.89

Order Now

1 HP Motor Only

SCU300504

$ 308.49

 Order Now

1-1/2 HP Motor Only

SCU300500

$ 393.72

 Order Now

Shutoffs  
Schuld parts prices are based on a $291 minimum flex system order - individual prices are higher, call before ordering.

Drop Tube Feed Control Switch - Schuld

SCU401-1060

$87.96

 Order Now

End Control Discharge Head w/Safety Switch Final Drop - Schuld

SCU401-1006

$ 140.70

 Order Now

End Control Shutoff for 10 lb Volume Drop

SCU401-1005

$324.74

 Order Now

 

Boots & Tail Pieces for 3" System
Schuld parts prices are based on a $291 minimum flex system order - individual prices are higher, call before ordering.  

30° Clear Plastic Boot

 CHO4347C $49.25 Order Now

30° Poly Boot

 SCU401-1001 $41.94 Order Now

0° Clear Plastic Boot

 CHO6093 $52.00 Order Now

0° Twin Poly Boot (Quad AD System)

SCU401-1003

$114.32

 Order Now

Single Tail Piece Carton, 3" Flex

SCU401-3001

$197.54

 Order Now

Dual Tail Piece for 75 MM System

SCU401-3002

$322.70

 Order Now

Single thru Tail piece for 75 MM System

SCU401-3004

$134.63

 Order Now

Dual Thru Tail piece for 75 MM System

SCU401-3005

$204.98

 Order Now

 

PVC Tubing, Flighting & Feed Drops - 3" Schuld System
Schuld parts prices are based on a $291 minimum flex system order - individual prices are higher, call before ordering.

50# Volume Drop                    SCU401-3011                $188.06    Order Now
50# Volume Drop End Control  SCU401-1009                $520.91    Order Now
Schuld 75 MM 10# Volume Drop Complete w/Hardware
SCU401-3010 
$39.09          Order Now

AP 12# Accu-Volume Drop Complete w/Hardware AGPAP-1261
$36.00    Order Now

PVC Conveyor Tube 10' - Schuld 75 MM
This item can not be shipped UPS		 SCU401-3008

20.29

 Order Now
45° Conveyor Tube Elbow - Schuld  75 MM SCU401-3009

19.20

 Order Now
PVC Tube Splicer - Schuld
75 MM		 SCU401-3024

4.60

 Order Now
Flighting for Feed System - Schuld 75 MM
This item can not be shipped UPS		 SCU401-3013

3.37 / ft

 Order Now
Kwik-Attach Drop Kit
AGPAP-2276
$9.44

Order Now

Poly Drop Outlet w/Shutoff 75MM (3" Discharge)

AGPFLX-2433

9.44

 Order Now
Drop Tube 3" I.D. x 12' - Schuld   This item can not be shipped UPS SCU401-1039

17.58

 Order Now
Drop Tube 3-1/2"  I.D. x 12'  - Schuld   This item can not be shipped UPS SCU401-1040

19.75

 Order Now
AP Y Drop Tube  AGPFLX-0502

26.40

 Order Now
Poly Drop Outlet w/Shutoff 
75 MM		 SCU401-3014 10.96 Order Now

Schuld old style feed systems and bin parts in stock!

[Farm Store Index]    

 

[Home]  
[Send Me Literature]    [Show Stopper Equipment]   [Farm Supplies Index]
  [Order Online - Shopping Cart]    

800-848-8386

Office Hours:  8:00 AM - 5:00 PM Central Time
 Monday - Friday